Multi-Link ladlers for gravity and sand casting
Linear or rotating dosing devices based upon the standard models 305 and 306. with a linear stroke up to 8000 mm and a maximum rotation 270 degrees
Concept:
Automatic feeding of two or more gravity, or sandmolds with one linear or rotating dosing device from one or more holding furnaces.
Mode of operation:
Each casting station is fed after notification of readiness. The sequence is at will. The dosing device is freely adjustable with different quantities to filling holes within it’s working range and has also the possibility to "pour in portions" ( pour into several filling holes from a single spoon charge ).
These units offer the following benefits:
- Fully programmable (no adjustments of limit switches)
- Straight forward simple programming
- Automatic shot weight correction
- Minimal cycle time: 9 sec. for model 305 and 19 sec. for model 306
- Accuracy
- Special programmable pouring contour to avoid turbulence
- Sensor wiring check every cycle
- Direct pour in shot hole
- 2-axes movement at same time
- Free standing on own pedestal
- Large draw down in furnace
- Shot weight up to 20 kg for model 305
- Shotweight up to 60 kg for model 306
- Fits a wide range of die cast machines
- Special options for brass castings avaibl
| Features Ladle 305 | 3-axis servo |
| Max. shot weight | 20 Kg |
| Stroke lenght | from 1840 mm up to 2200 mm |
| Machine rotation | 270° |
| Machine linear stroke | up to 8000 mm |
| Min. cycle time | 29 seconds |
| Accuracy standard | 0.5% |
| Features Ladle 306 | 3-axis servo |
| Max. shot weight | 60 Kg |
| Stroke lenght | from 2000 mm up to 3250 mm |
| Machine rotation | 270° |
| Machine linear stroke | up to 8000 mm |
| Min. cycle time | 29 seconds |
| Accuracy standard | 0.5% |
| Omschrijving | Download |
|---|---|
| Brochure Automatic dosing systems |  |